================================
General
================================
rsa and dsa allow ssh connection to a remote server, without providing a password.
==========================
Short Introduction
==========================
First we generate public key, using ssh-keygen utlity.
Then we scp the generated id_rsa.pub file to the remote server.
On the remote server, under .ssh folder, append the newly generated key into authorized_keys file.
cd .ssh
ssh-keygen
General
================================
rsa and dsa allow ssh connection to a remote server, without providing a password.
==========================
Short Introduction
==========================
All work is done under ~home/.ssh/ folder.
First we generate public key, using ssh-keygen utlity.
Then we scp the generated id_rsa.pub file to the remote server.
On the remote server, under .ssh folder, append the newly generated key into authorized_keys file.
cd .ssh
ssh-keygen
cp id_rsa.pub id_rsa.pub_myhost
sftp id_rsa.pub_myhost to remote host
ssh to remote host
cat id_rsa.pub_myhost >> .ssh/authorized_keys
rm id_rsa.pub_myhost
==========================
Elaborate Introduction
==========================
(From Use Public Key Authentication with SSH)
SSH keys come in pairs; a private and a public key.
Usually the private key is saved as ~/.ssh/id_<type> and the public key is ~/.ssh/id_<type>.pub.
The type of encryption most often used by default is RSA, so your keys should be named id_rsa and id_rsa.pub.
The public key is meant to be handed out freely, and added to servers you wish to connect to in the ~/.ssh/authorized_keys file.
The private key should be secured on your local machine with strict access rules.
When thinking of SSH keys in terms of a lock and key:
The public part is the lock, which can be copied to multiple locations.
The private key is password-protected when encrypted, it is analogous to keeping a physical key in a lockbox.
With this example in mind, using an SSH key works as follows.
First, the lockbox/passphrase is opened to obtain the key/private key, which is then used to open the lock/public key and grant access to your remote server.
==========================
id_dsa vs id_rsa
==========================
DSA encryption is based upon prime numbers
RSA encryption is based upon exponents
Both are secure and standard in IT.
================================
Files under .ssh folder
================================
rm id_rsa.pub_myhost
==========================
Elaborate Introduction
==========================
(From Use Public Key Authentication with SSH)
SSH keys come in pairs; a private and a public key.
Usually the private key is saved as ~/.ssh/id_<type> and the public key is ~/.ssh/id_<type>.pub.
The type of encryption most often used by default is RSA, so your keys should be named id_rsa and id_rsa.pub.
The public key is meant to be handed out freely, and added to servers you wish to connect to in the ~/.ssh/authorized_keys file.
The private key should be secured on your local machine with strict access rules.
When thinking of SSH keys in terms of a lock and key:
The public part is the lock, which can be copied to multiple locations.
The private key is password-protected when encrypted, it is analogous to keeping a physical key in a lockbox.
With this example in mind, using an SSH key works as follows.
First, the lockbox/passphrase is opened to obtain the key/private key, which is then used to open the lock/public key and grant access to your remote server.
==========================
id_dsa vs id_rsa
==========================
DSA encryption is based upon prime numbers
RSA encryption is based upon exponents
Both are secure and standard in IT.
================================
Files under .ssh folder
================================
These are the files under some_user/.ssh/
cd .ssh
cd .ssh
ls -l
authorized_keys
id_dsa
id_dsa.pub
id_rsa
id_rsa.pub
known_hosts
known_hosts
The history of connections:
each record is in the form of <IP> ssh-rsa <key>.
For example:
111.222.333.444 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAnRpgyOd3sZmzjDrFwVsFckHNDDQfK2
222.444.666.777 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAnRpgyOd3sZmzjDrFwVsFckHNDDQfKW
324.435.657.343 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAndsffggTdHVZ0u3mIqe060XhNppGVe
authorized_keys
id_dsa
id_dsa.pub
id_rsa
id_rsa.pub
known_hosts
known_hosts
The history of connections:
each record is in the form of <IP> ssh-rsa <key>.
For example:
111.222.333.444 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAnRpgyOd3sZmzjDrFwVsFckHNDDQfK2
222.444.666.777 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAnRpgyOd3sZmzjDrFwVsFckHNDDQfKW
324.435.657.343 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAndsffggTdHVZ0u3mIqe060XhNppGVe
id_dsa
Private dsa key
-----BEGIN DSA PRIVATE KEY-----
MIIBvAIBAAKBgQDJfi3h0RyeXPdrne0q6zbee8yGkGPCyLPFTLCK7+PwpHjAVKEy
3Kcp5Ex7+ysveXBEo2EcCF8pxYFVz2Q1mqdarve4NHSBCVLgxTykSIZMHmkg7psE
jkixu17egkShsdffdfdffefdfeffrtt8xZ/t91pFuA7ob3K+1PxC376EvwIVAP+T
GdXcFdW5Qnr9Pc1Sa8PWSHDy6d6dds*Q7CIAk7B6naLV4+iM3KBAGft/5EVRtuAq
ziK5zDbOPJkQOA3VRTAsrg==
-----END DSA PRIVATE KEY-----
id_rsa
Private rsa key
-----BEGIN RSA PRIVATE KEY-----
MIICXAIBAAKBgQDF19RBhiB5QrYZVogZEdisCuh+Oo55EvZ5OrRUJnK9l0usKwom
ZRNtkCPtdW1BZnF0oM2+6Apbyb54/DYxw4UFmR45zo4DyK81xd7vT/AaWzWpRoLg
ZWBK5TMg2D7QWOfulhSvuAg+oIXsvVMlsxf3UbqcQkjv35KT8FKMncifFwIBIwKB
EDsdUsdn78KcSwCGZzjAu8fGbeFAnS5+6G5/A67angWJUc19X1dqyPdhEmHHZnbN
wpbw40tBFCRcMpE9BLdylLL7UNZX1nfVYcLqIzGhdAm9/f6jLsjVSPR+V6nSqEfA
A4VbSM03DYWBWVl4DlmhUwDY2gd5k+wv9RrMYx/ueNI6CwJBAPGQiGlSU43g5AOJ
Ejydz+oKS3UDePedEyCJqyxWXcBMDUOjDewCpwMm7KI=
-----END RSA PRIVATE KEY-----
id_dsa.pub
dsa keys
ssh-dss AAAAB3NzaC1kc3MAAACr49ivsdqfMCEFB7GSOMMWQcPMyt6T3DNDhdQtZg= my_user@some_server_A
id_rsa.pub
rsa keys
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAxdfUQYYgeUK2GVaIGRHYrArofjqOes= my_user@some_server_B
authorized_keys
rsa keys and dsa keys
ssh-dss AAAAB3NzaC1kc3MAAACr49ivsdqfMCEFB7GSOMMWQcPMyt6T3DNDhdQtZg= my_user@some_server_A
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAxdfUQYYgeUK2GVaIGRHYrArofjqOes= my_user@some_server_B
If this file exists on server_XXX, it lists who can connect to server_XXX.
It got a list of public keys from remote server(s) that should connect via ssh, to server_XXX.
Private dsa key
-----BEGIN DSA PRIVATE KEY-----
MIIBvAIBAAKBgQDJfi3h0RyeXPdrne0q6zbee8yGkGPCyLPFTLCK7+PwpHjAVKEy
3Kcp5Ex7+ysveXBEo2EcCF8pxYFVz2Q1mqdarve4NHSBCVLgxTykSIZMHmkg7psE
jkixu17egkShsdffdfdffefdfeffrtt8xZ/t91pFuA7ob3K+1PxC376EvwIVAP+T
GdXcFdW5Qnr9Pc1Sa8PWSHDy6d6dds*Q7CIAk7B6naLV4+iM3KBAGft/5EVRtuAq
ziK5zDbOPJkQOA3VRTAsrg==
-----END DSA PRIVATE KEY-----
id_rsa
Private rsa key
-----BEGIN RSA PRIVATE KEY-----
MIICXAIBAAKBgQDF19RBhiB5QrYZVogZEdisCuh+Oo55EvZ5OrRUJnK9l0usKwom
ZRNtkCPtdW1BZnF0oM2+6Apbyb54/DYxw4UFmR45zo4DyK81xd7vT/AaWzWpRoLg
ZWBK5TMg2D7QWOfulhSvuAg+oIXsvVMlsxf3UbqcQkjv35KT8FKMncifFwIBIwKB
EDsdUsdn78KcSwCGZzjAu8fGbeFAnS5+6G5/A67angWJUc19X1dqyPdhEmHHZnbN
wpbw40tBFCRcMpE9BLdylLL7UNZX1nfVYcLqIzGhdAm9/f6jLsjVSPR+V6nSqEfA
A4VbSM03DYWBWVl4DlmhUwDY2gd5k+wv9RrMYx/ueNI6CwJBAPGQiGlSU43g5AOJ
Ejydz+oKS3UDePedEyCJqyxWXcBMDUOjDewCpwMm7KI=
-----END RSA PRIVATE KEY-----
id_dsa.pub
dsa keys
ssh-dss AAAAB3NzaC1kc3MAAACr49ivsdqfMCEFB7GSOMMWQcPMyt6T3DNDhdQtZg= my_user@some_server_A
id_rsa.pub
rsa keys
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAxdfUQYYgeUK2GVaIGRHYrArofjqOes= my_user@some_server_B
authorized_keys
rsa keys and dsa keys
ssh-dss AAAAB3NzaC1kc3MAAACr49ivsdqfMCEFB7GSOMMWQcPMyt6T3DNDhdQtZg= my_user@some_server_A
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAxdfUQYYgeUK2GVaIGRHYrArofjqOes= my_user@some_server_B
If this file exists on server_XXX, it lists who can connect to server_XXX.
It got a list of public keys from remote server(s) that should connect via ssh, to server_XXX.
================================
Generating Public keys
================================
run command:ssh-keygen (defaulte to rsa)
or
or
ssh-keygen –t dsa
or
ssh-keygen –t rsa
-t = type (rsa/dsa)
Each of these commands would generate pair of keys:
id_dsa – stores the private key
id_dsa.pub – stores the public keyor
ssh-keygen –t rsa
-t = type (rsa/dsa)
Each of these commands would generate pair of keys:
id_dsa – stores the private key
passphrase: optional
we skip…
Same if we generate rsa – another pair of keys is generated.
id_rsa – stores the private key
id_rsa.pub – stores the public key
The key files are plain text files.
================================
Transfer the generated public key to remote server
================================
Now – need to transfer the pub key to
the remote server and append into authorized_keys or authorized_keys2 on the remote server.authorized_keys file lists “who is going to connect me”
After adding an entry there, the user would be authorized to connect without password, via ssh.
Run this command to scp id_rsa.pub file to remote server:
scp id_rsa.pub some_user@<remote server IP>:/user_home/.ssh/id_rsa.pub_my_key
Now append new key into the authorized_keys file.
ssh to <remote server IP>
cd .ssh
less id_rsa.pub_my_key >> authorized_keys.2
==============================
.ssh/authorized_keys permissions
==============================
.ssh and .ssh/authorized_keys must have specific permissions.
.ssh must be 700
.ssh/authorized_keys must be 600
Other permission would not work.
Code Example:
--------------------------
On Remote server 111.222.333.444
--------------------------
chmod 777 .ssh
chmod 777 .ssh/authorized_keys
--------------------------
On Local server--------------------------
ssh akaplan@111.222.333.444
Get an error to login.
--------------------------
On Remote server 111.222.333.444
--------------------------
less /var/log/secure
May 3 10:27:46 remote_server sshd[11605]: Authentication refused: bad ownership or modes for file /home/akaplan/.ssh/authorized_keys
May 3 10:27:46 remote_server sshd[11605]: Authentication refused: bad ownership or modes for file /home/akaplan/.ssh/authorized_keys
cd /home/akaplan/
chmod 700 .ssh
chmod 600 .ssh/authorized_keys
ls -lA
-rwx------ 1 akaplan akaplan 1216 May 3 08:51 authorized_keys
ls -lA | grep ssh
drw------- 2 akaplan akaplan 4096 May 3 08:52 .ssh
--------------------------
On Local server
--------------------------
ssh akaplan@111.222.333.444
Successful Login!
https://cects.com/openssh-rsa-authentication-for-windows-and-linux/
==============================
Debug ssh connection
==============================
Option A - check Linux log /var/log/secure on remote server.
Option B - run ssh in verbose mode
/var/log/secure
You might see errors like:
May 3 10:27:46 remote_server sshd[11605]: Authentication refused: bad ownership or modes for file /home/akaplan/.ssh/authorized_keys
May 3 10:27:46 remote_server sshd[11605]: Authentication refused: bad ownership or modes for file /home/akaplan/.ssh/authorized_keys
ssh in verbose mode
When a connection is not successful, a good idea is to to run ssh in a verbose mode:ssh -v => debug1 messages
ssh -vv => debug1+debug2 messages
ssh -vvv => debug1+debug2+debug3 messages
Example.
This how a successful connection would look like:
This how a successful connection would look like:
ssh -vvv some_server
...
...
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/myuser/.ssh/identity (0x0)
debug2: key: /home/myuser/.ssh/id_rsa (0xaaaa40)
debug2: key: /home/myuser/.ssh/id_dsa (0xaaaa58)
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/myuser/.ssh/identity
debug3: no such identity: /home/myuser/.ssh/identity
debug1: Offering public key: /home/myuser/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-rsa blen 277
debug2: input_userauth_pk_ok: fp af:96:84:28:7e:0e:e5:8f:60:d5:d1:18:c5:3a:c8:49
debug3: sign_and_send_pubkey
debug1: read PEM private key done: type RSA
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug1: client_input_global_request: rtype hostkeys-00@openssh.com want_reply 0
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 0
debug3: tty_make_modes: ospeed 38400
debug3: tty_make_modes: ispeed 38400
debug3: tty_make_modes: 1 3
This how a failed connection would look like.
In this case:
1. check user got read permissions to the authorized_keys file on remote server
2. Replace the old entry in in authorized_keys file with new id_rsa.pub from local server
debug3:
check_host_in_hostfile: filename /home/myuser/.ssh/known_hosts
debug3:
check_host_in_hostfile: match line 9
debug1: Host
'222.333.444.555' is known and matches the RSA host key.
debug1: Found key in
/home/myuser/.ssh/known_hosts:9
debug2: bits set:
1040/2048
debug1:
ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys:
mode 1
debug1:
SSH2_MSG_NEWKEYS sent
debug1: expecting
SSH2_MSG_NEWKEYS
debug2: set_newkeys:
mode 0
debug1:
SSH2_MSG_NEWKEYS received
debug1:
SSH2_MSG_SERVICE_REQUEST sent
debug2:
service_accept: ssh-userauth
debug1:
SSH2_MSG_SERVICE_ACCEPT received
debug2: key:
/home/myuser/.ssh/identity (0x0)
debug2: key:
/home/myuser/.ssh/id_rsa (0xaaaa40)
debug2: key:
/home/myuser/.ssh/id_dsa (0xaaaa58)
debug1:
Authentications that can continue: publickey,password
debug3: start over,
passed a different list publickey,password
debug3: preferred
publickey,keyboard-interactive,password
debug3:
authmethod_lookup publickey
debug3: remaining
preferred: keyboard-interactive,password
debug3:
authmethod_is_enabled publickey
debug1: Next
authentication method: publickey
debug1: Trying private
key: /home/myuser/.ssh/identity
debug3: no such
identity: /home/myuser/.ssh/identity
debug1: Offering public
key: /home/myuser/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a
publickey packet, wait for reply
debug1: Authentications
that can continue: publickey,password
debug1: Offering
public key: /home/myuser/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a
publickey packet, wait for reply
debug1:
Authentications that can continue: publickey,password
debug2: we did not
send a packet, disable method
debug3:
authmethod_lookup password
debug3: remaining
preferred: ,password
debug3: authmethod_is_enabled
password
debug1: Next
authentication method: password
==============================
Example 1
==============================
Private Keys Example
local server: local-server
remote server: 10.201.30.400
user: userA
ssh userA@10.201.30.400
The authenticity of host '10.201.30.400 (10.201.30.400)' can't be established.
RSA key fingerprint is 5f:28:e8:59:cc:56:28:36:d2:59:68:4e:4a:a9:02:43.
Are you sure you want to continue connecting (yes/no)? yes
yes
iu@ecu-por-1-aps-1:~/.ssh>% ls -l
total 32
-rwx------ 1 iu starhome 1444 Jul 16 2012 authorized_keys
-rwx------ 1 iu starhome 672 Aug 9 2007 id_dsa
-rw-r--r-- 1 iu starhome 608 Aug 9 2007 id_dsa.pub
-rwx------ 1 iu starhome 887 Aug 9 2007 id_rsa
-rw-r--r-- 1 iu starhome 228 Aug 9 2007 id_rsa.pub
-rw-r--r-- 1 iu starhome 5417 Mar 6 2014 known_hosts
less authorized_keys
ssh-dss AAAAB3NzaC1kc3MAAACBAMl+ZIZyGFnSHe5m57jXTEstU0A8qjtBFabYVGvaRioP8mRWG8FDxd0UZRlAWlbJdFWbTzcbpC+7U7xs= userA@remote-hostA
ssh-rsa AAAAB3NzaC1yc2EAA434h43h43h43ivNcXe70/wGls1qUaC4GVgSuUzINg+0Fjn7pYUr7gIPqCF7L1TJbMX91G6nEJI79+Sk/BSjJ3Inxc= userA@remote-hostA
ssh-dss AAAAB3NzaC1kc3MAAACBAKL6JymW49ivsdqfMCEFB7GSOMMWQcPMyt6T3DNDhdQtZrabr10cAEAyRhsEfDG23R33LlgzOkU2lg= userB@remote-hostB
Manually copy content of local id_dsa.pub into remote .ssh/authorized_keys or .ssh/authorized_keys2
example of content of local id_dsa.pub
userC@local-serverA:~/.ssh>% less id_dsa.pub
ssh-dss qKOq+hkOAMcEGMELKFqocdGrg7wiMo4OJXzgzznWU8iJge8NVZjWJQBNZIqZvqU2jOOXl10B0GjamemeBghCHISz9tSmbw+i/+E= userC@local-serverA
save .ssh/authorized_keys2 and exit
exit
Connection to 10.201.30.400 closed.
login again
userA@local-server:~/.ssh>% ssh userA@10.222.443.400
***************************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
***************************************************************************
rhes-5.7_64-ig_v3.4.1
Last login: Tue Dec 30 08:33:17 2014 from 10.666.555.333
userA@10.222.443.400:~>%
Now need to re-enter the password.
Task completed!
==============================
Example 2
==============================
End to End example
-----------------------
Current situation
-----------------------
on server 100.100.333.196 trying to connect to 100.222.555.201
-----------------------
$ cd .ssh
iu@isr-sth-1-tsm-1 ~/.ssh
$ grep 100.222.555.201 *
known_hosts:100.222.555.201 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAwMw0LBil9iGPGZOl/TFhtOgSxgH92E20BVlSZSFp/m8e/AnIukFy6Xuw3uFVg/12AH60Kt0LjFlcuZole3wdZxBpkUc5lh2jejDirhl/FOZlwY6Y4ksMzQdx8TfEv9YUSRi1uG2czauw5ENtfhf46YqVVqQDDObL4w/yqiWiLc87PLxrZu5pO/D0xRppMYhKY4JEXX7MQ6tbwPuG3y9UOylGSm/+hXzIEEhGIeOeHqOzHA19lNusRctuh+9fpmswSUqh8d+k1UcIPJGwXvazBEx+MdPUzvWtuvMCrPi4m9FG8o+0VtoP1cH/0JPKfuj1A4s0vB2v8sDwsIOtVHEVCw==
$ sftp 100.222.555.201
Connecting to 100.222.555.201...
***************************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
***************************************************************************
rhes-6.6_64-ig_v4.3.2
iu@100.222.555.201's password:
sftp>
same with ssh session
$ ssh 100.222.555.201
***************************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
***************************************************************************
rhes-6.6_64-ig_v4.3.2
iu@100.222.555.201's password:
Last login: Sun Jan 15 02:20:59 2017 from 100.100.333.196
-----------------------
Action:
-----------------------
Generate public key, and add it to remote host .ssh/authorized_keys
on server 100.100.333.196
$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/iu/.ssh/id_rsa):
/home/iu/.ssh/id_rsa already exists.
Overwrite (y/n)? y
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/iu/.ssh/id_rsa.
Your public key has been saved in /home/iu/.ssh/id_rsa.pub.
The key fingerprint is:
a0:57:fa:27:85:df:c7:87:da:17:54:d3:e0:1e:d6:8c iu@isr-sth-1-tsm-1
The key's randomart image is:
+--[ RSA 2048]----+
| ...|
| . =o|
| . . E =|
| . + . o o |
| . o S . o |
| . . o . . o |
| o o . + o|
| o + ..|
| . .. |
+-----------------+
-rwx------ 1 iu None 1675 Jan 18 07:30 id_rsa
-rw-r--r-- 1 iu None 400 Jan 18 07:30 id_rsa.pub
$ less id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEApNg2lpqwhJyeei0kBTY/YufAepdBmuELeVQro3fUwImBSwbseNAk5w9jb79GexH+cvi6PTa9McOnbglGD6aNYUm+b6fSv3nqT2IyGsUcYKcloCw2u1M2o6kuvurIWJCY9YnLDJukAVZ1NkDfozGsKi84NMOCfyl2qyPH1yijJrd/Jg8LeW5iIwBLtCdZ33NbbXwEtCJsahM4AEjnAg7wVO5VJVzoPMOAqQ7eCwpiRxUWQcN2JO5nlQ1+a0lYWuy/V878k5YnBUBn5ASIam1CsGLILVA61Le55SehbpTHdQq/l+4KJs+BzoZXEnAobNSW2VjjNkUQsOB0Gjt7MRA6jw== iu@isr-sth-2-myserver-2
$ less id_rsa
-----BEGIN RSA PRIVATE KEY-----
MIIEoQIBAAKCAQEApNg2lpqwhJyeei0kBTY/YufAepdBmuELeVQro3fUwImBSwbs
eNAk5w9jb79GexH+cvi6PTa9McOnbglGD6aNYUm+b6fSv3nqT2IyGsUcYKcloCw2
u1M2o6kuvurIWJCY9YnLDJukAVZ1NkDfozGsKi84NMOCfyl2qyPH1yijJrd/Jg8L
eW5iIwBLtCdZ33NbbXwEtCJsahM4AEjnAg7wVO5VJVzoPMOAqQ7eCwpiRxUWQcN2
JO5nlQ1+a0lYWuy/V878k5YnBUBn5ASIam1CsGLILVA61Le55SehbpTHdQq/l+4K
Js+BzoZXEnAobNSW2VjjNkUQsOB0Gjt7MRA6jwIBIwKCAQAS1uGqz9mowXEyiNDq
px0v3/i9jaEZA8bMCZ6WVtZ8Z3x9mmQrEHk++nHDoNTa3XwqZZGgmIqmmgSBmqjr
2IUvsKgMwrj/8K0QYv5pdZzX2JaV9mynsb0aBLTinn1L80SuWOQBcN+LH9LhoQOd
n0bgP+kqmgBJDA2P5tUCpY79HBoFt7xCkqGtZs8OoVX5KhGi0KNXUwnc9dCGwZ1q
6xmedZm0mUmQRjZpRIlbpi5iafAAW2WgK5JdJSazaCZdH8XYqGYjgDE6aySxTHry
PKjtvDldc+uuXBk0UPJF6hS0bjJTUDokzO9jx1TA9HRmeREYGY2zuzAIeMUoI0wh
JwHrAoGBANjT047Yo1NUkDYmrReKiqu8aDzps28D2t50iia7dE62UGWfiL0vLmWs
ttEuCDIUEst4fQCAwc67uhB4rM8PAN3WvurRlKATvOrCXHD+AMwWMGoMe2AWvz83
G1Wi3Xe4BeV6cD8VJSw7d9xxa/XKKVxndgHzVPJG2Z1WiPJ6lQUlAoGBAMKgM81a
SAghLIHNdpIQuJVgcjKOWGcY0XjwoJ7fEYF0GO6ZludfLr7jQFr7FBpV41bGJrxq
r1gqTltQzTmdFd5ZTpQLX9gyWfwSSuOk2bB6A2gvHoyIUp4kSAPn9xqSQKHEf85P
qSbp/lUIqTgiB+TfA0leSjof5hmkfa6UZeSjAoGAdbTR7nWafbGQHWVz6DVD9tP+
EnA81d2FcXJ24dN5pxKDal3rJN8ZL+Fqjs/YkDbIX9Oxko8KH8T+mzox7L8AeG1D
EcI6vUyLIFrhua51dhqskVc7qTDrehaZz2cKgtGczQfzynkxb8iC5WIkqgAH0xOX
1SxSr2hKP3gedQC3S+8CgYAyC/AQO8lhLRoSv84ITXFK+4sUUH0h0y6M0ClNbI95
DzmccKMljYEMg5Q0pvaKbdtfdMgh0kpYf+hDXeuhGcPLdgzkPXBqyx50BLQr6I+/
qlilwvk6FG0EF/VC1T+KfWETp46UIxzeHumg1ldmNKLxtbBjUsKhO2cN6HgW8vWh
MQKBgQDVeRqRTJEboqidWbB03yiJBb23lQbYtVgyfbLLuqRo5Cai8PqMIuAUr7w3
wZszv1oapNzVCZh0LjRL+nNk/iCTc6LczNHfWxJ78465Q3eBRrYpJc7JCzFJYUaQ
AqZYbU1bBQuBdCMzoy0s2LLa+Faw8pb5Xx1E9ad403OlGBDBcg==
-----END RSA PRIVATE KEY-----
on server 100.222.555.201, edit /starhome/iu/.ssh/authorized_keys
sftp 100.222.555.201
sftp> cd workarea
sftp> put id_rsa.pub
Uploading id_rsa.pub to /starhome/iu/workarea/id_rsa.pub
id_rsa.pub
cat ../workarea/id_rsa.pub >> authorized_keys
ssh-dss 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 iu@inf-guy-1-tst-1
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAxdfUQYYgeUK2GVaIGRHYrArofjqOeRL2eTq0VCZyvZdLrCsKJmUTbZAj7XVtQWZxdKDNvugKW8m+ePw2McOFBZkeOc6OA8ivNcXe70/wGls1qUaC4GVgSuUzINg+0Fjn7pYUr7gIPqCF7L1TJbMX91G6nEJI79+Sk/BSjJ3Inxc= iu@inf-guy-1-tst-1ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEApNg2lpqwhJyeei0kBTY/YufAepdBmuELeVQro3fUwImBSwbseNAk5w9jb79GexH+cvi6PTa9McOnbglGD6aNYUm+b6fSv3nqT2IyGsUcYKcloCw2u1M2o6kuvurIWJCY9YnLDJukAVZ1NkDfozGsKi84NMOCfyl2qyPH1yijJrd/Jg8LeW5iIwBLtCdZ33NbbXwEtCJsahM4AEjnAg7wVO5VJVzoPMOAqQ7eCwpiRxUWQcN2JO5nlQ1+a0lYWuy/V878k5YnBUBn5ASIam1CsGLILVA61Le55SehbpTHdQq/l+4KJs+BzoZXEnAobNSW2VjjNkUQsOB0Gjt7MRA6jw== iu@isr-sth-2-myserver-2
on server 100.100.333.196
$ ssh 100.222.555.201
***************************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
***************************************************************************
rhes-6.6_64-ig_v4.3.2
Last login: Wed Jan 18 07:33:23 2017 from 100.100.333.196
Now, no password is required.
==============================
Example 2
==============================
What does this error mean:
==============================
Example 3
==============================
$ sftp 444.222.666.111
Connecting to 444.222.666.111...
WARNING: DSA key found for host 444.222.666.111
in /home/iu/.ssh/known_hosts:13
DSA key fingerprint de:6e:01:1e:e2:0f:bd:9f:d8:9f:2f:a5:12:47:be:b6.
The authenticity of host '444.222.666.111 (444.222.666.111)' can't be established
but keys of different type are already known for this host.
RSA key fingerprint is e0:28:63:df:6d:bf:ec:89:5a:ed:f9:83:50:37:7b:39.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '444.222.666.111' (RSA) to the list of known hosts.
Permission denied (publickey).
Connection closed
Use -v option to see the full stack of messages
$ ssh -v 444.222.666.111
OpenSSH_4.7p1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to 194.20.69.142 [194.20.69.142] port 22.
debug1: Connection established.
debug1: identity file /home/iu/.ssh/identity type -1
debug1: identity file /home/iu/.ssh/id_rsa type 1
debug1: identity file /home/iu/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version 6.2.1.168 SSH Tectia Server
debug1: no match: 6.2.1.168 SSH Tectia Server
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.7
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host '194.20.69.142' is known and matches the RSA host key.
debug1: Found key in /home/iu/.ssh/known_hosts:23
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/iu/.ssh/identity
debug1: Offering public key: /home/iu/.ssh/id_rsa
debug1: Authentications that can continue: publickey
debug1: Offering public key: /home/iu/.ssh/id_dsa
debug1: Authentications that can continue: publickey
debug1: No more authentication methods to try.
Permission denied (publickey).
With -vvv flag you get even more detailed trace
$ ssh -vvv SFTP_MEG@444.222.666.111
OpenSSH_4.7p1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 444.222.666.111 [444.222.666.111] port 22.
debug1: Connection established.
debug1: identity file /home/iu/.ssh/identity type -1
debug3: Not a RSA1 key file /home/iu/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/iu/.ssh/id_rsa type 1
debug3: Not a RSA1 key file /home/iu/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/iu/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version 6.2.1.168 SSH Tectia Server
debug1: no match: 6.2.1.168 SSH Tectia Server
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.7
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group1-sha1,diffie-hellman-group14-sha1,diffie-hellman-group14-sha224@ssh.com,diffie-hellman-group14-sha256@ssh.com,diffie-hellman-group15-sha256@ssh.com,diffie-hellman-group15-sha384@ssh.com,diffie-hellman-group16-sha384@ssh.com,diffie-hellman-group16-sha512@ssh.com,diffie-hellman-group18-sha512@ssh.com,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group-exchange-sha224@ssh.com,diffie-hellman-group-exchange-sha384@ssh.com,diffie-hellman-group-exchange-sha512@ssh.com
debug2: kex_parse_kexinit: ssh-rsa,ssh-rsa-sha256@ssh.com
debug2: kex_parse_kexinit: aes128-cbc,aes128-ctr,aes192-cbc,aes192-ctr,aes256-cbc,aes256-ctr,crypticore128@ssh.com,seed-cbc@ssh.com,3des-cbc,arcfour,blowfish-cbc,twofish-cbc,twofish128-cbc,twofish192-cbc,twofish256-cbcdebug2: kex_parse_kexinit: aes128-cbc,aes128-ctr,aes192-cbc,aes192-ctr,aes256-cbc,aes256-ctr,crypticore128@ssh.com,seed-cbc@ssh.com,3des-cbc,arcfour,blowfish-cbc,twofish-cbc,twofish128-cbc,twofish192-cbc,twofish256-cbc
debug2: kex_parse_kexinit: hmac-sha1,hmac-sha1-96,hmac-sha256-2@ssh.com,hmac-sha224@ssh.com,hmac-sha256@ssh.com,hmac-sha384@ssh.com,hmac-sha512@ssh.com,crypticore-mac@ssh.com,hmac-md5,hmac-md5-96
debug2: kex_parse_kexinit: hmac-sha1,hmac-sha1-96,hmac-sha256-2@ssh.com,hmac-sha224@ssh.com,hmac-sha256@ssh.com,hmac-sha384@ssh.com,hmac-sha512@ssh.com,crypticore-mac@ssh.com,hmac-md5,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 149/256
debug2: bits set: 524/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/iu/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 22
debug1: Host '194.20.69.142' is known and matches the RSA host key.
debug1: Found key in /home/iu/.ssh/known_hosts:22
debug2: bits set: 489/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/iu/.ssh/identity (0x0)
debug2: key: /home/iu/.ssh/id_rsa (0xaaaa40)
debug2: key: /home/iu/.ssh/id_dsa (0xaaaa58)
debug1: Authentications that can continue: publickey
debug3: start over, passed a different list publickey
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/iu/.ssh/identity
debug3: no such identity: /home/iu/.ssh/identity
debug1: Offering public key: /home/iu/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey
debug1: Offering public key: /home/iu/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey).
==============================
Example 4
==============================
Sending file from isr-sth-2-cgw-1 to pru-cla-1-aps-2
============================
On iu@isr-sth-2-cgw-1
============================
sftp oracle@111.222.333.444
put id_rsa.pub
============================
On oracle@pru-cla-1-aps-2
============================
cat id_rsa.pub > .ssh/authorized_keys
less .ssh/authorized_keys
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAw78dKA+JM0PirDMgrng3yv8ZT+PCQD52/VoDkvsW47egKg7WlQxbY3TweOrslWxmM20tTr0i8NmCzYAEVcQmwuvSI4AG1P4V0x/n3kaOsaK/sNRurHgqb2effslEywS8GlfrXNSTlZZ1tsOey8T1140IGjN/JVvVAc8C4/U14U0=
============================
On iu@isr-sth-2-cgw-1
============================
iu@isr-sth-2-cgw-1:~/.ssh>%ssh oracle@111.222.333.444
connection!
iu@isr-sth-2-cgw-1:~/.ssh>% scp ./test_file.txt oracle@111.222.333.444:/software/oracle/oracle/
********************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
********************************************************************
rhes-5.5_64-ig_v3.3.0
test_file.txt 100% 0 0.0KB/s --:-- ETA
================================
Host Key
================================
Approve adding host key to known_keys file.
The authenticity of host '444.222.666.111 (444.222.666.111)' can't be established.
RSA key fingerprint is e0:28:63:df:4i:sc:ec:12:7j:ed:f9:83:50:37:7b:39.
Are you sure you want to continue connecting (yes/no)? yes
================================
ssh and ssh2 versions
================================
ssh connectivity have more then one version, OpenSSH and SSH2
The public key provided by client, must be the version that used on server side.
Convert the public key from OpenSSH to SSH2.
ssh-keygen -e -f ~/.ssh/id_dsa.pub > ~/.ssh/id_dsa_ssh2.pub
Convert SSH2 to OpenSSH.
ssh-keygen -i -f ~/.ssh/id_dsa_1024_a.pub > ~/.ssh/id_dsa_1024_a_openssh.pub
================================
Stop message Enter passphrase for key
==============================
Example 2
==============================
End to End example
-----------------------
Current situation
-----------------------
on server 100.100.333.196 trying to connect to 100.222.555.201
-----------------------
$ cd .ssh
iu@isr-sth-1-tsm-1 ~/.ssh
$ grep 100.222.555.201 *
known_hosts:100.222.555.201 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAwMw0LBil9iGPGZOl/TFhtOgSxgH92E20BVlSZSFp/m8e/AnIukFy6Xuw3uFVg/12AH60Kt0LjFlcuZole3wdZxBpkUc5lh2jejDirhl/FOZlwY6Y4ksMzQdx8TfEv9YUSRi1uG2czauw5ENtfhf46YqVVqQDDObL4w/yqiWiLc87PLxrZu5pO/D0xRppMYhKY4JEXX7MQ6tbwPuG3y9UOylGSm/+hXzIEEhGIeOeHqOzHA19lNusRctuh+9fpmswSUqh8d+k1UcIPJGwXvazBEx+MdPUzvWtuvMCrPi4m9FG8o+0VtoP1cH/0JPKfuj1A4s0vB2v8sDwsIOtVHEVCw==
$ sftp 100.222.555.201
Connecting to 100.222.555.201...
***************************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
***************************************************************************
rhes-6.6_64-ig_v4.3.2
iu@100.222.555.201's password:
sftp>
same with ssh session
$ ssh 100.222.555.201
***************************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
***************************************************************************
rhes-6.6_64-ig_v4.3.2
iu@100.222.555.201's password:
Last login: Sun Jan 15 02:20:59 2017 from 100.100.333.196
-----------------------
Action:
-----------------------
Generate public key, and add it to remote host .ssh/authorized_keys
on server 100.100.333.196
$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/home/iu/.ssh/id_rsa):
/home/iu/.ssh/id_rsa already exists.
Overwrite (y/n)? y
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/iu/.ssh/id_rsa.
Your public key has been saved in /home/iu/.ssh/id_rsa.pub.
The key fingerprint is:
a0:57:fa:27:85:df:c7:87:da:17:54:d3:e0:1e:d6:8c iu@isr-sth-1-tsm-1
The key's randomart image is:
+--[ RSA 2048]----+
| ...|
| . =o|
| . . E =|
| . + . o o |
| . o S . o |
| . . o . . o |
| o o . + o|
| o + ..|
| . .. |
+-----------------+
-rwx------ 1 iu None 1675 Jan 18 07:30 id_rsa
-rw-r--r-- 1 iu None 400 Jan 18 07:30 id_rsa.pub
$ less id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEApNg2lpqwhJyeei0kBTY/YufAepdBmuELeVQro3fUwImBSwbseNAk5w9jb79GexH+cvi6PTa9McOnbglGD6aNYUm+b6fSv3nqT2IyGsUcYKcloCw2u1M2o6kuvurIWJCY9YnLDJukAVZ1NkDfozGsKi84NMOCfyl2qyPH1yijJrd/Jg8LeW5iIwBLtCdZ33NbbXwEtCJsahM4AEjnAg7wVO5VJVzoPMOAqQ7eCwpiRxUWQcN2JO5nlQ1+a0lYWuy/V878k5YnBUBn5ASIam1CsGLILVA61Le55SehbpTHdQq/l+4KJs+BzoZXEnAobNSW2VjjNkUQsOB0Gjt7MRA6jw== iu@isr-sth-2-myserver-2
$ less id_rsa
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
on server 100.222.555.201, edit /starhome/iu/.ssh/authorized_keys
sftp 100.222.555.201
sftp> cd workarea
sftp> put id_rsa.pub
Uploading id_rsa.pub to /starhome/iu/workarea/id_rsa.pub
id_rsa.pub
cat ../workarea/id_rsa.pub >> authorized_keys
ssh-dss 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 iu@inf-guy-1-tst-1
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAxdfUQYYgeUK2GVaIGRHYrArofjqOeRL2eTq0VCZyvZdLrCsKJmUTbZAj7XVtQWZxdKDNvugKW8m+ePw2McOFBZkeOc6OA8ivNcXe70/wGls1qUaC4GVgSuUzINg+0Fjn7pYUr7gIPqCF7L1TJbMX91G6nEJI79+Sk/BSjJ3Inxc= iu@inf-guy-1-tst-1ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEApNg2lpqwhJyeei0kBTY/YufAepdBmuELeVQro3fUwImBSwbseNAk5w9jb79GexH+cvi6PTa9McOnbglGD6aNYUm+b6fSv3nqT2IyGsUcYKcloCw2u1M2o6kuvurIWJCY9YnLDJukAVZ1NkDfozGsKi84NMOCfyl2qyPH1yijJrd/Jg8LeW5iIwBLtCdZ33NbbXwEtCJsahM4AEjnAg7wVO5VJVzoPMOAqQ7eCwpiRxUWQcN2JO5nlQ1+a0lYWuy/V878k5YnBUBn5ASIam1CsGLILVA61Le55SehbpTHdQq/l+4KJs+BzoZXEnAobNSW2VjjNkUQsOB0Gjt7MRA6jw== iu@isr-sth-2-myserver-2
on server 100.100.333.196
$ ssh 100.222.555.201
***************************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
***************************************************************************
rhes-6.6_64-ig_v4.3.2
Last login: Wed Jan 18 07:33:23 2017 from 100.100.333.196
Now, no password is required.
==============================
Example 2
==============================
What does this error mean:
d:\tma_taps>ssh user@111.222.333.444
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS
CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now
(man-in-the-middle attack)!
It is also possible that the RSA host key has just been changed.
The fingerprint for the RSA key sent by the remote host is
bf:6d:7b:c4:ab:ad:c4:3f:35:fd:b8:34:d7:10:74:05.
Please contact your system administrator.
Add correct host key in /home/local_user/.ssh/known_hosts to get rid of
this message.
Offending key in /home/local_user/.ssh/known_hosts:9
RSA host key for 111.222.333.444 has changed and you have requested
strict checking.
Host key verification failed.
Option A - Indeed the RSA was changed on the remote server.
Option B - The fingerprint of the remote server was changed (new
hardware, new OS).
In this case need to clean up local known_hosts file
/home/local_user/.ssh/known_hosts.
Meaning to delete the rows of remote server.
/home/local_user/.ssh/known_hosts.
Meaning to delete the rows of remote server.
After
that you will be asked to accept SSH key again.
And the /home/local_user/.ssh/known_hosts would be updated with a new entry.
==============================
Example 3
==============================
This the result of ssh connection to server 444.222.666.111.
This connection was working before.
What went wrong?
Need to compare the ssh versions on Client and on Server.
ssh version is not compatible with ssh2 version.
ssh version is using public key in format ssh
sshs version is using public key in format ssh2
If Client is using ssh and connecting to a server that is using ssh2, the connection would fail.
That might happen, if on server OS upgrade was done.
In this case, the authorized_keys file on the remote server is out of sync with the public key of the local server.
Example of rsa SSH PUBLIC KEY
ssh-rsa AAAAB3NzaC1yc2DEDJNKIwAAAQEAwsH7d6WfAobryFBD7MHIYIBA0q3bNHlaG0FhB3EahqElwmAUyt+3+7vv1NkOymlgIFsHe7sddsd87iiI/pQpmiQH9iQ4h2KYpIwlHWXKGJqG9TPwNHUR7G+f1R7zh9cXaIRk2NFFXzgfPKAtP8cixUhqraju+9nA0NyAsQdjsdhks879o2//T28n7K/YyFgK4AsEBqn8S2di3bJ8VUmAQhbWivu5lZTMmNn9quVa97OmilDCea+nL425pksSzMkntZB26yQ7WNyUUCFNltCkbqShnigAI7Kbpngk2tHaRMxP3OzWDdd+qnZV9qdwlCMPyIWr87rLhyoot7sGmw== my_user@my_server
Example of rsa SSH2 PUBLIC KEY
---- BEGIN SSH2 PUBLIC KEY ----
Comment: "2048-bit RSA, converted from OpenSSH by my_user@my_server"
AAAAB3NzaC1yc2EAAAABIwAAAQEAwsH7d6WfAobryFBD7MHIYIBA0q3bNHlaG0Fh
B3EahqElwmAUyt+3+7vv1NkOymlgIFsHe72dBGHPYINSHiiI/pQpmiQH9iQ4h2KY
pIwlHWXKGWEDWDWEHUR7G+f1R7zh9cXaIRk2NFFXzgfPKAtP8cixUhqraju+9nA
0NyAsQyvo2En+GwGr5//T28n7K/YyFgK4AsEBqn8S2di3bJ8VUmAQhbWivu5lZTM
mNn9quVa97OmilDCea+nL425pksSzMkntZB26yQ7WNyUUCFNltCkbqShnigAI7Kb
pngk2tHaRMxP3OzWDdd+gyER79dfdfdsfr53GHLhyoot7sGmw==
---- END SSH2 PUBLIC KEY ----
Example of connection, and failure:
This connection was working before.
What went wrong?
Need to compare the ssh versions on Client and on Server.
ssh version is not compatible with ssh2 version.
ssh version is using public key in format ssh
sshs version is using public key in format ssh2
If Client is using ssh and connecting to a server that is using ssh2, the connection would fail.
That might happen, if on server OS upgrade was done.
In this case, the authorized_keys file on the remote server is out of sync with the public key of the local server.
Example of rsa SSH PUBLIC KEY
ssh-rsa AAAAB3NzaC1yc2DEDJNKIwAAAQEAwsH7d6WfAobryFBD7MHIYIBA0q3bNHlaG0FhB3EahqElwmAUyt+3+7vv1NkOymlgIFsHe7sddsd87iiI/pQpmiQH9iQ4h2KYpIwlHWXKGJqG9TPwNHUR7G+f1R7zh9cXaIRk2NFFXzgfPKAtP8cixUhqraju+9nA0NyAsQdjsdhks879o2//T28n7K/YyFgK4AsEBqn8S2di3bJ8VUmAQhbWivu5lZTMmNn9quVa97OmilDCea+nL425pksSzMkntZB26yQ7WNyUUCFNltCkbqShnigAI7Kbpngk2tHaRMxP3OzWDdd+qnZV9qdwlCMPyIWr87rLhyoot7sGmw== my_user@my_server
Example of rsa SSH2 PUBLIC KEY
---- BEGIN SSH2 PUBLIC KEY ----
Comment: "2048-bit RSA, converted from OpenSSH by my_user@my_server"
AAAAB3NzaC1yc2EAAAABIwAAAQEAwsH7d6WfAobryFBD7MHIYIBA0q3bNHlaG0Fh
B3EahqElwmAUyt+3+7vv1NkOymlgIFsHe72dBGHPYINSHiiI/pQpmiQH9iQ4h2KY
pIwlHWXKGWEDWDWEHUR7G+f1R7zh9cXaIRk2NFFXzgfPKAtP8cixUhqraju+9nA
0NyAsQyvo2En+GwGr5//T28n7K/YyFgK4AsEBqn8S2di3bJ8VUmAQhbWivu5lZTM
mNn9quVa97OmilDCea+nL425pksSzMkntZB26yQ7WNyUUCFNltCkbqShnigAI7Kb
pngk2tHaRMxP3OzWDdd+gyER79dfdfdsfr53GHLhyoot7sGmw==
---- END SSH2 PUBLIC KEY ----
Example of connection, and failure:
Connecting to 444.222.666.111...
WARNING: DSA key found for host 444.222.666.111
in /home/iu/.ssh/known_hosts:13
DSA key fingerprint de:6e:01:1e:e2:0f:bd:9f:d8:9f:2f:a5:12:47:be:b6.
The authenticity of host '444.222.666.111 (444.222.666.111)' can't be established
but keys of different type are already known for this host.
RSA key fingerprint is e0:28:63:df:6d:bf:ec:89:5a:ed:f9:83:50:37:7b:39.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '444.222.666.111' (RSA) to the list of known hosts.
Permission denied (publickey).
Connection closed
Use -v option to see the full stack of messages
$ ssh -v 444.222.666.111
OpenSSH_4.7p1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to 194.20.69.142 [194.20.69.142] port 22.
debug1: Connection established.
debug1: identity file /home/iu/.ssh/identity type -1
debug1: identity file /home/iu/.ssh/id_rsa type 1
debug1: identity file /home/iu/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version 6.2.1.168 SSH Tectia Server
debug1: no match: 6.2.1.168 SSH Tectia Server
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.7
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host '194.20.69.142' is known and matches the RSA host key.
debug1: Found key in /home/iu/.ssh/known_hosts:23
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/iu/.ssh/identity
debug1: Offering public key: /home/iu/.ssh/id_rsa
debug1: Authentications that can continue: publickey
debug1: Offering public key: /home/iu/.ssh/id_dsa
debug1: Authentications that can continue: publickey
debug1: No more authentication methods to try.
Permission denied (publickey).
With -vvv flag you get even more detailed trace
$ ssh -vvv SFTP_MEG@444.222.666.111
OpenSSH_4.7p1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 444.222.666.111 [444.222.666.111] port 22.
debug1: Connection established.
debug1: identity file /home/iu/.ssh/identity type -1
debug3: Not a RSA1 key file /home/iu/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/iu/.ssh/id_rsa type 1
debug3: Not a RSA1 key file /home/iu/.ssh/id_dsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /home/iu/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version 6.2.1.168 SSH Tectia Server
debug1: no match: 6.2.1.168 SSH Tectia Server
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.7
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group1-sha1,diffie-hellman-group14-sha1,diffie-hellman-group14-sha224@ssh.com,diffie-hellman-group14-sha256@ssh.com,diffie-hellman-group15-sha256@ssh.com,diffie-hellman-group15-sha384@ssh.com,diffie-hellman-group16-sha384@ssh.com,diffie-hellman-group16-sha512@ssh.com,diffie-hellman-group18-sha512@ssh.com,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group-exchange-sha224@ssh.com,diffie-hellman-group-exchange-sha384@ssh.com,diffie-hellman-group-exchange-sha512@ssh.com
debug2: kex_parse_kexinit: ssh-rsa,ssh-rsa-sha256@ssh.com
debug2: kex_parse_kexinit: aes128-cbc,aes128-ctr,aes192-cbc,aes192-ctr,aes256-cbc,aes256-ctr,crypticore128@ssh.com,seed-cbc@ssh.com,3des-cbc,arcfour,blowfish-cbc,twofish-cbc,twofish128-cbc,twofish192-cbc,twofish256-cbcdebug2: kex_parse_kexinit: aes128-cbc,aes128-ctr,aes192-cbc,aes192-ctr,aes256-cbc,aes256-ctr,crypticore128@ssh.com,seed-cbc@ssh.com,3des-cbc,arcfour,blowfish-cbc,twofish-cbc,twofish128-cbc,twofish192-cbc,twofish256-cbc
debug2: kex_parse_kexinit: hmac-sha1,hmac-sha1-96,hmac-sha256-2@ssh.com,hmac-sha224@ssh.com,hmac-sha256@ssh.com,hmac-sha384@ssh.com,hmac-sha512@ssh.com,crypticore-mac@ssh.com,hmac-md5,hmac-md5-96
debug2: kex_parse_kexinit: hmac-sha1,hmac-sha1-96,hmac-sha256-2@ssh.com,hmac-sha224@ssh.com,hmac-sha256@ssh.com,hmac-sha384@ssh.com,hmac-sha512@ssh.com,crypticore-mac@ssh.com,hmac-md5,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 149/256
debug2: bits set: 524/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/iu/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 22
debug1: Host '194.20.69.142' is known and matches the RSA host key.
debug1: Found key in /home/iu/.ssh/known_hosts:22
debug2: bits set: 489/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/iu/.ssh/identity (0x0)
debug2: key: /home/iu/.ssh/id_rsa (0xaaaa40)
debug2: key: /home/iu/.ssh/id_dsa (0xaaaa58)
debug1: Authentications that can continue: publickey
debug3: start over, passed a different list publickey
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/iu/.ssh/identity
debug3: no such identity: /home/iu/.ssh/identity
debug1: Offering public key: /home/iu/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey
debug1: Offering public key: /home/iu/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey).
==============================
Example 4
==============================
Sending file from isr-sth-2-cgw-1 to pru-cla-1-aps-2
============================
On iu@isr-sth-2-cgw-1
============================
sftp oracle@111.222.333.444
put id_rsa.pub
============================
On oracle@pru-cla-1-aps-2
============================
cat id_rsa.pub > .ssh/authorized_keys
less .ssh/authorized_keys
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAw78dKA+JM0PirDMgrng3yv8ZT+PCQD52/VoDkvsW47egKg7WlQxbY3TweOrslWxmM20tTr0i8NmCzYAEVcQmwuvSI4AG1P4V0x/n3kaOsaK/sNRurHgqb2effslEywS8GlfrXNSTlZZ1tsOey8T1140IGjN/JVvVAc8C4/U14U0=
============================
On iu@isr-sth-2-cgw-1
============================
iu@isr-sth-2-cgw-1:~/.ssh>%ssh oracle@111.222.333.444
connection!
iu@isr-sth-2-cgw-1:~/.ssh>% scp ./test_file.txt oracle@111.222.333.444:/software/oracle/oracle/
********************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
********************************************************************
rhes-5.5_64-ig_v3.3.0
test_file.txt 100% 0 0.0KB/s --:-- ETA
Done without password prompt.
iu@isr-sth-2-cgw-1:~/.ssh>% sftp oracle@111.222.333.444
Connecting to 111.222.333.444...
********************************************************************
NOTICE TO USERS
Use of this system constitutes consent to security monitoring and testing.
All activity is logged with your host name and IP address.
********************************************************************
rhes-5.5_64-ig_v3.3.0
Done without password prompt.
================================
Host Key
================================
A host key is the server’s public key.
The host key is used by the client to decrypt an authentication message sent from the server when connecting.
The basic purpose of the host key is to ensure that when you connect to a remote host, it is actually the host that you intended to connect to.
Creating a host key for a Secure Shell server is usually done only once.
The server software creates the host key automatically during installation.
Another option is to manually generate a host key and select the encryption algorithm (DSA or RSA). This similar to User Authentication keys.
A host key consists of two components, a private and a public component.
The public component is sent to the client when the client connects.
The private component must be protected. Only server administrator and the Secure Shell server have access to it.
Upon the initial connection, the user is promted with message:
The authenticity of host '444.222.666.111 (444.222.666.111)' can't be established.
RSA key fingerprint is e0:28:63:df:4i:sc:ec:12:7j:ed:f9:83:50:37:7b:39.
Are you sure you want to continue connecting (yes/no)? yes
Answering yes, would add an entry for server 444.222.666.111 to .ssh/known_keys file.
Upon the initial connection, the user is promted with message:
The authenticity of host '444.222.666.111 (444.222.666.111)' can't be established.
RSA key fingerprint is e0:28:63:df:4i:sc:ec:12:7j:ed:f9:83:50:37:7b:39.
Are you sure you want to continue connecting (yes/no)? yes
Answering yes, would add an entry for server 444.222.666.111 to .ssh/known_keys file.
Approve adding host key to known_keys file.
The authenticity of host '444.222.666.111 (444.222.666.111)' can't be established.
RSA key fingerprint is e0:28:63:df:4i:sc:ec:12:7j:ed:f9:83:50:37:7b:39.
Are you sure you want to continue connecting (yes/no)? yes
================================
ssh and ssh2 versions
================================
ssh connectivity have more then one version, OpenSSH and SSH2
The public key provided by client, must be the version that used on server side.
Convert the public key from OpenSSH to SSH2.
ssh-keygen -e -f ~/.ssh/id_dsa.pub > ~/.ssh/id_dsa_ssh2.pub
Convert SSH2 to OpenSSH.
ssh-keygen -i -f ~/.ssh/id_dsa_1024_a.pub > ~/.ssh/id_dsa_1024_a_openssh.pub
================================
Stop message Enter passphrase for key
================================
Enter passphrase for key '/starhome/iu/.ssh/id_rsa':
Enter passphrase for key '/starhome/iu/.ssh/id_dsa':
iu@espat-2-ora-01's password:
iu@DERATVDB00001:~/.ssh>% ssh-agent bash
iu@DERATVDB00001:~/.ssh>% ssh-add
Could not open a connection to your authentication agent.
iu@DERATVDB00001:~/.ssh>% eval $(ssh-agent)
Agent pid 29752
iu@DERATVDB00001:~/.ssh>% ssh-add
Enter passphrase for /starhome/iu/.ssh/id_rsa: <password>
Enter passphrase for /starhome/iu/.ssh/id_dsa: <password>
Enter passphrase for key '/starhome/iu/.ssh/id_rsa':
Enter passphrase for key '/starhome/iu/.ssh/id_dsa':
iu@espat-2-ora-01's password:
iu@DERATVDB00001:~/.ssh>% ssh-agent bash
iu@DERATVDB00001:~/.ssh>% ssh-add
Could not open a connection to your authentication agent.
iu@DERATVDB00001:~/.ssh>% eval $(ssh-agent)
Agent pid 29752
iu@DERATVDB00001:~/.ssh>% ssh-add
Enter passphrase for /starhome/iu/.ssh/id_rsa: <password>
Enter passphrase for /starhome/iu/.ssh/id_dsa: <password>
Next time connection will immediate
In case ssh-add thows an error:
ssh-add /c/Users/akaplan/.ssh/id_rsa
/c/Users/myuser/.ssh/id_rsa: No such file or directory
In this case need to create the id_rsa
cmd -> ssh-keygen -> press Enter -> key is generated
Now, run again ssh-add /c/Users/akaplan/.ssh/id_rsa
Now, run again ssh-add /c/Users/akaplan/.ssh/id_rsa
========================
ssh and git
========================
From the git prompt:
$ ssh-add -l
Could not open a connection to your authentication agent.
$ eval "$(ssh-agent)"
Agent pid 375
$ ssh-add -l
The agent has no identities.
$ ssh-add /c/Users/myuser/.ssh/id_rsa
Identity added: /c/Users/myuser/.ssh/id_rsa (myuser@my_domain)
to test:
$ ssh -T git@bitbucket.org
logged in as myuser
No you can use git to connect to Bitbucket.
Oracle Dba By Example. Code Samples, Scripts, Reference.: Working With Rsa And Dsa Public Keys. >>>>> Download Now
ReplyDelete>>>>> Download Full
Oracle Dba By Example. Code Samples, Scripts, Reference.: Working With Rsa And Dsa Public Keys. >>>>> Download LINK
>>>>> Download Now
Oracle Dba By Example. Code Samples, Scripts, Reference.: Working With Rsa And Dsa Public Keys. >>>>> Download Full
>>>>> Download LINK 0S